ES Electronics

ES 25 Energy saver for lighting and variable motor loads

We’ll be with you on every walk of life to identify new opportunities.

ES~25 Energy Saver is a proven and state-of-the-art Energy Saving equipment installed in series to Mains / Sub lighting panel to minimise the wastage of energy and save electricity bills up to 30%.

The device works under the principle of voltage and current optimization technique to reduce wasteful energy and harmonics which results in improvising power quality and reduce demand charges.

The power saving system such Street light energy saver has award winning Automatic Thyristor controlled equipment to adjust the source voltage, lighting ignition level, street light control and time based switching mode, to get maximum benefits in terms of conserving energy.

Street light energy saver system employs low loss high efficiency impedance matching system without de-lamping or re-lamping the existing circuit with its user friendly on load bypass, short circuit protection, iot monitoring system capabilities

Block Diagram
VOLTAGE WAVE FORM

Product Benefits

Want to Know More ? Contact

Ravi Kumar

R. SHASHIKUMAR

Screenshot 2023-08-02 at 5.12.52 PM
ES25 - Capacity 500 KVA Energy Saver Panel
Screenshot 2023-08-02 at 5.15.53 PM
ES25 - Capacity 750 KVA Energy Saver Panel
motor-1
ES25 - with Automatic Change Over Switch Capacity 45 KVA Energy Saver Panel
motor-3
ES 25 with APFC and Harmonic Filters Capacity 75 KVA Energy Saver Panel

Energy savers for Motor Loads and AHUs

ES~25 is a high efficiency device to optimize the voltage, reduction of harmonics and adjusting the capacitance of the motor to minimize the power loss or wasteful energy and convert into direct savings The equipment is best suited for variable load motors such as Compressors, Lifts, Escalators, injection Maulding Machines etc. The drop of voltage from 3.3V to 2.9V (optimum level) resulted in 9% reduction in voltage resulted in 20% reduction in consumption for the Microprocessor

System Schematics

  • Harmonic Suppression – Designed to eliminate Harmonics
  • Star connection to optimize the voltage​​​​​​​
  • Power Factor improvement to adjust the capacitance to the desired level
  • Impedance matching technique is used.

Active Harmonic Filters and Power Optimizers in ES~25 Energy Savers help to eliminate harmonic pollution from the grid, reduce power quality problems and use energy more efficiently and reliably.

Low power factor results high current, rise in copper loss and reduction of efficiency of the system. Incorporation of Power Factor Correction System in ES~25 Power Saving Equipment facilitates improvement in the Power Factor because this is designed to achieve precisely unity power factor/ near to unity to get maximum PF rebate and avoid leading PF and available for balanced as well as unbalanced loads.

Model Image
VOLTAGE WAVE FORM

Our Global Presence

Our Brochure

It appears you don’t have a PDF plugin for this browser. 

Get in Touch